来料加工合同范本（中英文对照）（供来料加工和来件装配用）

来料加工合同范本（中英文对照）（供来料加工和来件装配用）
订约人：
××工业有限公司（以下简称甲方）
××工业有限公司（以下简称乙方）
兹经双方同意甲方委托乙方在_________加工标准磁罗经，一切
所需的零件与原料由甲方提供，其条款如下：
1．来料加工和来件装配的商品和数量
（1）商品名称——标准磁罗经
（2）数量——共计_______台
2．一切所需用的零件和原料由甲方提供，或乙方在____________
或___________购买，清单附于本合同内；
3．每种型号的加工费如下：
（1）GLC－1型标准磁罗经：_________U．S．D（大写：____
美元）
（2）GLC－2型标准磁罗经：_________ U．S．D（大写_____
美元）
（3）GLC－3型标准磁罗经： _________ U．S．D（大写______
美元）
4．加工所需的主要零件、消耗品及原料由甲方运至
_______，若有短少或破损，相比看月饼委托加工合同。甲方应负责补充供应；
5．甲方应于成品交运前一个月，开立信用证或电汇全部加工
费用及由乙方在__________ 或 _________ 购买零配件、消耗品及
原料费用；
6．乙方应在双方同意的时间内完成GLC—1型标准磁罗经
的加工和交运，不得延迟，凡发生无法控制的和不可预见的情况
例外。
7．零件及原料的损耗率：
加工时零件及原料损耗率为_____％，其损耗率由甲方免费
供应，如损耗率超过 ____ ％，应由乙方补充加工所需之零件和
原料。
8．若甲方误运原料及零件，或因大意而将原料及零件超运，
乙方应将超运部分退回，其费用由甲方承担，若遇有短缺，应由
甲方补充；
9．甲方提供加工GLC－1型标准磁罗经的零件及原料，乙方
应严格按规定的设计加工，不得变更；
10．技术服务：
甲方同意乙方随时提出派遣技术人员到____________的要求，
协助培训乙方的技术人员，并允许所派技术人员留在乙方检验成
品。为此，乙方同意支付每人日薪__________美元，其他一切费
用（包括来回旅费）概由甲方负责：
11．与本合同有关的一切进出口手续应由乙方予以办理：
12．加工后的标准磁罗经，乙方应运交给甲方随时指定的国
外买方：
13．其他条件
（1）标准磁罗经的商标应由甲方提供，若出现法律纠纷，甲
方应负完全责任：
（2）若必要时乙方在__________或____________ 购买加工标
准磁罗经的零件及原料，其品质必须符合标准并事先需甲方核准。
（3）为促进出口业务，乙方应储备标准磁罗经样品，随时可
寄往甲方所指定的国外买主，所需的零件和原料，由甲方所运来
的零件及原料地报销。
14．本合同一式三份，甲方与乙方在鉴字后各执一份，另一份
呈送__________有关部门备案。
工业有限公司工业有限公司
________ ________
经理经理

CONTRACT FOR
PROCESSING
WITH SUPPLIED MATERIALS AND
ASSEMBLING WITH SUPPLIED PARTS
Messrs,
INDUSTRY LTD. (hereinafter called Party A)
and
INDUSTRY LTD. (hereinafter called Party B)
have agreed that Party B shall manufacture Standard Magnetic
Compasses in____________ with all necessary parts and materials
supplied by Party A under the following terms and conditions:
1. Commodity and quantities for processing with supplied mate-
rials and assembling with supplied parts:
(1) Commodity-Standard Magnetic Compass;
(2) Quantity-____________sets in total.
2. All necessary parts and materials listed in the contract shall ei-
ther be supplied by Party A or purchased in ____________ or
by Party B;
3. The processing charge for each model is as follows:
(1) Standard Magnetic Compass of Type GLC-1 at U. S. $
_____________(SAY:_________________U. S. D) each;
(2) Standard Magnetic Compass of Type GLC-2 at U. S. $
_____________(SAY:________________ U. S. D) each;
(3) Standard Magnetic Compass of Type GLC-3 at U. S. $
____________(SAY:___________U. $. D) each.
4. The main parts, consumables and materials required for pro-
cessing will be sent to (place) by Party A and if there is any
shortage or damage, Party A should be held responsible for
supplying replacements;
5. Party A should pay Party B by L/C or T/T covering the full
amount of processing charges and costs of parts, consumables
and materials purchased in__________or____________by Party
B one month before shipment of the finished products;
6. Party B must complete the manufacturing of all Standard Mag-
netic Compasses of type GLC-1 and effect shipment within the
agreed date without delay except in the occurrence of uncon-
trollable and unforceeable events ;
7. The damage rate of parts and materials:
The damage rate of parts and materials in processing is
__________% and such a damage rate of parts and materials
shall be supplied free by Party A, should the damage rate ex-
ceed _____________ % , Party B shall supply additional materials
and necessary parts;
8. Should shipment of materials and parts sent by Party A be
wrong or in excess, Party B shall return the excessive portion
at the expense of Party A, in case of short shipment, Party A
shall make up the shortage;
9. All parts and materials supplied by Party A for Standard Mag-
netic Compasses shall be processed by Party B strictly in ac-
cordance with the design without any modification;
10. Technical Service:
Party A agrees to send technicians to______________to help
training Party B,s technicians at the request of the latter at
any time and allows the technicians to remain with Party B
for inspection of the finished products. In such case, Party
B agrees to pay a monthly salary of U. S. $ ____________ for
each person, all other expenses (including round trip
tickets) will be borne by Party A;
11. All import and export formalities in connection with this con-
tract should be handled by Party B;
12. All Standard Magnetic Compasses processed by Party B shall
be shipped to the foreign buyers appointed by Party A at any
time;
13. Other terms and conditions:
(1) The trade marks of Standard Magnetic Compass shall be
supplied by Party A, should there be any legal dispute,
Party A shall be held fully responsible;
(2) The quality of parts and materials, if necessary, pur-
chased in__________ or_____________ by Party B for Stan-
dard Magnetic Compasses must measure up to standard
and be approved by Party A beforehand;
(3)For promotional purposes, Party B shall prepare samples
of Standard Magnetic Compass at any time and send
them to foreign Buyers appointed by Party A , all parts
and materials required would be supplied out of the
stock supplied by Party A;
14. This contract shall be made in triplicate, Party A and
Party B shall, both signing all copies, retain one copy
and submit one to authorities concerned in
(place) for registration.

INDUSTRY LTD. INDUSTRY LTD.
________ ____________
Manager Manager (责任编辑：admin)